page 13
amis series
AMIS 60
- 4 Input 60 Watt Mixer-Amplier
• 4 balanced dual mic/line inputs
• Overall bass and treble controls
• 70V and 8 ohm outputs
• Vox muting on channels 1 and 2 Bell, Pre
Announce, Evac and Alert tones on board
• Vox triggered relay output
• VCA remote master level control RC1
- 4 Input 60 Watt Mixer-Amplier
AMIS 120
- 4 Input 120 Watt Mixer-Amplier
• 4 balanced mic/dual RCA line inputs
• 70 volt 4 or 8 ohm operation
• Vox muting on channels 1 and 2 Bell, Pre
Announce, Evac and Alert tones on board
• Vox triggered output relay
• VCA master level control
• 15 VDC phantom power
• Mains or 24DVC operation
• 6 zone speaker selector with ‘all call’
• Both overall and internal limiting
• Balanced XLR 700mV output for connection to
multiple power amps
• Tape Output 350mV @ 10K ohms
• Signal Present LED
• 120VAC/24VDC operation
AMIS 120XL
- 8 Input 120 Watt
Mixer-Amplier
• 70V and 4, 8 ohm outputs
• Vox muting on channels 1,2 and 3 Bell, Pre
Announce, Evac and Alert tones on board
• Vox triggered relay output
• Tape Output (350mV @ 10K ohms) and
balance output (700mv)
• Insert point for connection to processors
• VCA remote master level control
• Overdrive protection and internal limiting
• Signal Present LED
• 240VAC/24VDC operation
• 70V and 4, 8 ohm outputs
• Vox muting on channels 1, 2 and 3 Bell, Pre
Announce, Evac and Alert tones on board
• Vox triggered relay output
• Tape Output (350mV @ 10K ohms) and
balance output (700mv)
• 15V phantom power on all mic inputs
(defeatable per channel by rear switch)
AMIS 250
- 6 Chan 250 Watt Mixer-Amp
• Insert point for connection to processors
• Overdrive protection and internal limiting
• Signal Present LED
• 240VAC/24VDC operation
• Temperature Sensing Fan Cooling
• Insert point for connection to processors
• 15V Phantom power on all mic inputs
(defeatable by rear switch)
• 15V phantom power on all
microphone inputs (defeat able
per channel by rear switch)
Commentaires sur ces manuels